Mud Pump Spray Pump  Function 1.The   spray  pump   is  a   kind   of   single   stage   single   suction  horizontal   volute      pump. 2.It is used to Impeller rotates generating centrifugal force, and the spray pipe assembly takes the  water in the water tank to the cylinder liner, cooling and lubrication to the cylinder liner and  piston so as to prolong their service lives, 3.transfer water that temperature is less than 80 degree Celsius or sewage water contains a little sand. 4.It  can  be  belt   driven   when   used  on  drilling  pump  or  be  driven  by  motor  for  othe  r use.   Features: 1. The spray pump which manufactured with special machinery seal technology has very long service life, reaching internationally advanced level and improved operational reliability   2. Its impeller is specially designed to have a wider flow pass and smooth vanes, with larger flow area and smooth fluid pass, making the spray pump reach the internationally advanced level in pump efficiency and energy-saving, 10% higher than similar products.   3. The spray pump has adopted a shell thicker than normal one, with rational pass and less  turbulence.  Impeller and shell are made of high wear resistant cast irons, with service life longer than other products  by 50%;   4. The spray pump shaft has high strength that can bear certain load, reducing  shafts  deflection   and  extending seals service life;   5. The shaft is lubricated with lubricants and lubricating grease and the oil seal is made of special structure and materials, suitable for high and low temperatures and complicated environment;Front opening structure  is used for convenient installation, repair and maintenance.

Mud Pump Shear Relief Valve Shear pin safety valve is used at the discharge part of the mud pump.JA-3 shear pin safety valve changes the discharging pressure by changing the position of the shear pin ,which is operation easy and work reliable. Features: 1.  Opening and shutting neatly. 2.  Piston's bearing pressure area is small. 3.  To reposition simply. 4.  Safety Valve may use for multifold mud pumps. 5. flange / screw thread connection  6. Max pressure:35Mpa

Mud Pump stuffing box Mud Pump stuffing box description: 1. The stuffing box contains oil seal ring, O ring and framework oil seal.  2. The stuffing box isolate the power end and the hydraulic end.  3. The stuffing box is fixed on the rack with the intermediate draw bar making reciprocated linear motion in its inner bore. Mud pump stuffing box can be Used on below mud pump: Brand  Type Emsco F-350 F-500 F-650 F-800 F-1000 FA-1300 FB-1300 FA-1600 FB-1600           Gardener Denver PZ-7 PZ-8 PZ-9 PZ-10 PZ-11     National 7-P-50 8-P-80 9-P-100 10-P-130 12-P-160     Ideco T-800 T-1000 T-1300 T-1600       Oilwell A-350 A-560 A-650 A-850 A-1100 A-1400 A-1700 China 3NB-350 3NB-500 3NB-800 3NB-1000 3NB-1300 3NB-1600 3NB-2200

Mud hog pump is the "heart" of the oilfield drilling system, and mud pump liner is an important vulnerable parts of mud pump fluid end. The service time of oil drilling mud pump will be directly affected by service time of mud pump liner. Mud pump cylinder liner will contact with the high-temperature, high-pressure gas directly, and mud pump piston ring makes a high-speed reciprocating motion on the surface of the liner, which determines that the mud pump liner not only has sufficient strength and rigidity, but also must withstand high temperature, corrosion resistance and wear resistance. NO. Liner Type Liner Introduction Features 1 Ceramic Liner Adopt the most advanced international toughened zirconium. Value of fracture toughness is K10～15MPa, value of resist-bent strength is σ600～800Mpa. Ceramic Liners can not only adapted to some tough environment such as deep oil reservoir, hard stratum and severe earthiness, but also can be used for offshore oil and natural gas exploitation. With advantages of wear-resistance, erosion-resistance, high pressure resistance, high temperature- resistance, high strength, High thermal ratings and high hardness. ◎Reduced the cost of shipment, maintenance, labor and storage in the drilling works. ◎With better toughness properties and longer service life. ◎Reduced piston wears and water consumption for lubrication. 2 Bi-metal Liner It combines a forged wear-proof outer sleeve and a wear resistant and corrosion resistance inner sleeve with high chromium iron. After heat treatment, high chrome iron inner sleeve can reach a hardness of HRC≥61~64. It’s warmly welcomed by many oil-fields at home and abroad. ◎High temperature- resistance, high strength, High thermal ratings and high hardness. ◎Reduced the cost of shipment, maintenance, labor and storage in the drilling works.   3 Mono-metal Liner Carbon layer’s quenching thickness of inner bore reaches 1.5-1.8mm and hardness 58-60HRC ◎ Have characteristics of high hardness, high corrosion resistance, free of deformation and best surface finish   Mud Pump Liner Specifications:   Mud pump liner size (Metric) 90mm 100mm, 110mm,120mm, 130mm, 140mm, 150mm, 160mm, 170mm, 180mm Mud pump liner size (British) 4”,  4 1/2”,  5”,  5 1/2”,  6”  ,6 1/4” , 6 1/2”,  6 3/4” , 7” , 7 1/2”,  8”   Mud pump liner we provided can be suitable with these pump liners BOMCO F500 mud pump, F800 mud pump, bomco F1000 mud pump, F1300 mud pump, bomco F1600 mud pump, F-1600HL high pressure mud pump, F-2200HL mud pump Honghua F-1300 mud pump, F-1600 mud pump, 3NB-1600HL mud pump, 3NB-2200HL mud pump National Oilwell 7P-50 mud pump, 8P-80 mud pump, 9P-100 mud pump, 10P-130 mud pump, 12P-160 mud pump, 14P-220 mud pump Emsco F-500 mud pump, F-800 mud pump, F-1000 mud pump, F-1300 mud pump, F-1600 mud pump, FB-1300 mud pump, FB-1600 mud pump Gardner Denver PZ-7 mud pump, PZ-8 mud pump, PZ-9 mud pump, PZ-10 mud pump, PZ-11 mud pump Ideco T-800 mud pump, T-1000 mud pump, T-1300 mud pump, T-1600 mud pump Gardner Denver 7.5*10” FY FXD mud pump; 7.5*8” FY FXX mud pump , 5*10” FD FXD mud pump Oilwell A-850-PT mud pump, A-1400-PT mud pump, A-1700-PT mud pump Russian pumps UNB600, UNBT950, UNBT950L, UNBT1180   Mud pump liner pressure ratings, example of F-1600 oil rig pump: Strokes/minute OD of mud pump liner（mm）Rated working pressure（MPa） ② Mud pump liner size OD(mm) Φ180 Φ170 Φ160 Φ150 Φ140 Φ130 Rated working pressure（MPa） F-1300 18.5 20.7 23.4 26.6 30.5 34.3 F-1600 22.7 25.5 28.8 32.7 34.3 34.3 Rated Power  ② Displacement（ L/S）① F-1300 kW F-1600 kW ( HP ) ( HP ) 130 1036 1275 50.42 44.97 39.83 35.01 30.5 26.3   -1408 -1733 120 956 1176 46.54 41.51 36.77 32.32 28.15 24.27   -1300 -1600 110 876 1078 42.66 38.05 33.71 29.62 25.81 22.25   -1192 -1467 100 797 980 38.78 34.59 30.64 26.93 23.46 20.23   -1083 -1333 90 717 882 34.9 31.13 27.58 24.24 21.11 18.21   -975 -1200 1 —— —— 0.3878 0.3459 0.3064 0.2693 0.2346 0.2023